An integrated production and preventive maintenance planning model with imperfect maintenance in multi-state system

Document Type : Research Paper

Authors

1 Iran university of science and technology

2 Iran University of Science and Technology

3 Department of Industrial Engineering, Iran University Of Science and Technology, Tehran, Iran

Abstract

Production planning and maintenance are two important problems in manufacturing systems. Despite the relationship exists between these two problems due to sudden failures and production capacity occupied by maintenance activities, each of these problems planned separately and as a result program and model efficiencies reduce in the real world. The aim of integrated production and maintenance planning models is to plan production and maintenance simultaneously due to the interaction of these two programs on one another. In this study, an integrated model is provided for planning production and preventive maintenance in a multi-state system. This model can be used to determine the production planning variables such as time to setup, the levels of production, inventory and shortages simultaneously with maintenance planning variables such as time and type of preventive maintenance. This research considers the concept of imperfect maintenance in modeling the preventive maintenance variable. At the end, a numerical example is used to assess the performance of the model. It is shown that using proposed model with two type of preventive maintenance will reduce the total cost of the integrated problem.

Keywords

Main Subjects

References

Karimi, B., Fatemi Ghomi, S. M. T., and Wilson, J. M. (2003).The Capacitated Lot Sizing Problem: a Review of Models and Algorithms.Omega, 31(0), 365-378.
Liu, X., Wang, W. , and Peng, R. (2015). An Integrated Production and Delay-Time Based Preventive Maintenance Planning Model for a Multi-Product Production System.Eksploatacja i Niezawodnosc - Maintenance and Reliability, 17(2), 215-221.
Gehan, M., Castanier, B., and Lemoine, D. (2014).Integration of Maintenance in the Tactical Production Planning Process under Feasibility Constraint.Advances in Production Management Systems. Innovative and Knowledge-Based Production Management in a Global-Local World, 438, 467-474.
Khoshalhan, F., and Cheraghali Khani, A. (2012). An Integrated Model of Aggregate Production Planning with Maintenance Costs.International Journal of Industrial Engineering & Production Management (IJIE), 23(1), 67-77.
Ashayeri, J., Teelen, A., and Selenj, W. (1996).A Production and Maintenance Planning Model for the Process Industry.International Journal of Production Research, 34(12), 3311-3326.
Najid, N. M., Alaoui-Selsouli, M., and Mohafid, A.(2011). An Integrated Production and Maintenance Planning Model with Time Windows and Shortage Cost.International Journal of Production Research, 49(8), 2265-2283.
Weinstein L., and Chung, C.-H. (1999). Integrating Maintenance and Production Decisions in a Hierarchical Production Planning Environment.Computers & Operations Research, 26(10-11), 1059-1074.
Aghezzaf E.-H., and Najid, N. M. (2008). Integrated Production Planning and Preventive Maintenance in Deteriorating Production Systems.Information Sciences, 178(17), 3382-3392.
Sitompul, C., and Aghezzaf, E. H. (2001). An Integrated Hierarchical Production and Maintenance‐Planning Model.Journal of Quality in Maintenance Engineering, 17(3), 299-314.
Yildirim M. B., and Ghazi Nezami, F. (2014). Integrated Maintenance and Production Planning with Energy Consumption and Minimal Repair.The International Journal of Advanced Manufacturing Technology, 74(0), 1419-1430.
Pixopoulou, N. and Papageorgiou, L. G. (2004). An MILP Model for Medium-Term Production and Maintenance Management.Probabilistic Safety Assessment and Management, 06(0), 2827-2832.
Aghezzaf, E. H., Jamali, M. A., and Ait-Kadi, D. (2007). An Integrated Production and Preventive Maintenance Planning Model.European Journal of Operational Research, 181(2), 679-685.
Alaoui, M., Najid, N. M. , and Mohafid, A. (2010). Lagrangian Relaxation Based Heuristic for an Integrated Production and Maintenance Planning Problem.8th International Conference of Modeling and Simulation (MOSIM’10) - “Evaluation and Optimization of Innovative Production Systems of Goods and Services”, Hammamet - Tunisia.
Alaoui-Selsouli, M., Mohafid, A., and Najid, N. M. (2012). Lagrangian Relaxation Based Heuristic for an Integrated Production and Maintenance Planning Problem.International Journal of Production Research, 50(13), 3630-3642.
Lu Z., and Zhang, Y. (2011). A Joint Model of Production and Preventive Maintenance Plan.Advanced Materials Research, 156-157(0), 18-23.
Lu, Z., Zhang, Y., and Han, X. (2013). Integrating Run-Based Preventive Maintenance into the Capacitated Lot Sizing Problem with Reliability Constraint.International Journal of Production Research, 51(05), 1379-1391.
Nourelfath M., and Châtelet, E. (2012).Integrating Production, Inventory and Maintenance Planning for a Parallel System with Dependent Components.Reliability Engineering & System Safety, 101(0), 59-66.
Fitouhi, M.-C., and Nourelfath, M.. (2012). Integrating Noncyclical Preventive Maintenance Scheduling and Production Planning for a Single Machine.International Journal of Production Economics, 136(2), 344-351.
Limere, V., Deschacht, J., and Aghezzaf, E. H. (2012). Integrated Production and Maintenance Planning: Modeling Corrective Maintenance.1st International Conference on Operations Research and Enterprise Systems (CFP ICORES - 2012), Vilamoura, Algarve, Portugal, 204-207.
Machani, M., and Nourelfath, M. (2010). A Genetic Algorithm for Integrated Production and Preventive Maintenance Planning in Multi-State Systems.8th International Conference of Modeling and Simulation (MOSIM’10) - “Evaluation and Optimization of Innovative Production Systems of Goods and Services”, Hammamet - Tunisia.
Nourelfath, M., Fitouhi, M.-C., and Machani, M. (2010). An Integrated Model for Production and Preventive Maintenance Planning in Multi-State Systems.IEEE Transactions on Reliability, 59(3), 496-506.
Machani, M., and Nourelfath, M. (2012). A Variable Neighbourhood Search for Integrated Production and Preventive Maintenance Planning in Multi-State Systems.International Journal of Production Research, 50(13), 3643-3660.
Fitouhi, M.-C., and Nourelfath, M. (2014). Integrating Noncyclical Preventive Maintenance Scheduling and Production Planning for Multi-State Systems.Reliability Engineering & System Safety, 121(0), 175-186.
Wang, S.Integrated Model of Production Planning and Imperfect Preventive Maintenance Policy for Single Machine System.International Journal of Operational Research, 18(2), 140-156.
Aghezzaf, E.-H., Khatab, A., and Tam, P. L. (2016). Optimizing Production and Imperfect Preventive Maintenance Planning's Integration in Failure-Prone Manufacturing Systems.Reliability Engineering & System Safety, 145(0), 190-198.
Yalaoui, A., Chaabi, K., and Yalaoui, F. (2014). Integrated Production Planning and Preventive Maintenance in Deteriorating Production Systems. Information Sciences, 278(0), 841-861.
Zhao, S., Wang, L., and Zheng, Y (2014). Integrating Production Planning and Maintenance: an Iterative Method. Industrial Management & Data Systems, 114(2), 162-182.
Mehdizadeh, M., and Atashi Abkenar, A. A. (2014). Harmony Search Algorithm for Solving Two Aggregate Production Planning Models with Breakdowns and Maintenance.8th International Management Conference (Managemant Challenges for Sustainable Development), Bucharest, Romania.
Portioli-Staudacher, A.,  and Tantardini, M. (2012). Integrated Maintenance and Production Planning: a Model to Include Rescheduling Costs.Journal of Quality in Maintenance Engineering, 18(1), 42-59.
Bergeron, D., Jamali, M. A., and Ait-Kadi, D. (2009). Coupling Simulation and Optimization for an Integrated Production and Maintenance Planning in Manufacturing Systems. 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'09) Moscow, Russia.
Cazanas, R. D., and Delgado Sobrino, D. R. (2014). On the Integration of Production and Maintenance Planning at the Tactical Level: Proposal of a Contribution Procedure.Applied Mechanics and Materials, 474(0), 35-41.
Goel, H. D., Grievink, J., and Weijnen, M. P. C.. (2003). Integrated Optimal Reliable Design, Production, and Maintenance Planning for Multipurpose Process Plants.Computers & Chemical Engineering, 27(0), 1543-1555.
Haoues, M., Dahane, M., Mouss, K. N.,  and Rezg, N. (2013). Production Planning in Integrated Maintenance Context for Multi-Period Multi-Product Failure-Prone Single-Machine.IEEE 18th Conference on Emerging Technologies & Factory Automation (ETFA), Cagliari.
Liu, S., Yahia, A., and Papageorgiou, L. G. (2014). Optimal Production and Maintenance Planning of Biopharmaceutical Manufacturing under Performance Decay.Industrial & Engineering Chemistry Research, 53(0), 17075-17091.
Macchi, M., Pozzetti, A., and Fumagalli, L. (2014). Industrial Implementation of Models for Joint Production and Maintenance Planning.Advances in Production Management Systems. Innovative and Knowledge-Based Production Management in a Global-Local World,499-506.
Pistikopoulos, E. N., Vassiliadis, C. G., Arvela, J., and Papageorgiou, L. G. (2001). Interactions of Maintenance and Production Planning for Multipurpose Process Plants - A System Effectiveness Approach.Industrial & Engineering Chemistry Research, 40(0), 3195-3207.
Nikolopoulos, K., Metaxiotis, K., Lekatis, N., and Assimakopoulos, V. (2003). Integrating Industrial Maintenance Strategy into ERP.Industrial Management & Data Systems, 103(3), 184-191.
Nourelfath, M., Nahas, N., and Ben-Daya, M. (2016). Integrated Preventive Maintenance and Production Decisions for Imperfect Processes.Reliability Engineering & System Safety, 148(0), 21-31.
Powell, D. J., and Rodseth, H. (2013).ICT-Enabled Integrated Operations: Towards a Framework for the Integration of Manufacturing- and Maintenance Planning and Control.Advances in Production Management Systems. Sustainable Production and Service Supply Chains, 245-252.
Rishel, T. D.,  and Christy, D. P. (1996). Incorporating Maintenance Activities into Production Planning; Integration at the Master Schedule versus Material Requirements Level.International Journal of Production Research, 34(2), 421-446.
Wolter, A., and Helber, S. (2013). Simultaneous Production and Maintenance Planning for a Single Capacitated Resource Facing Both a Dynamic Demand and Intensive Wear and Tear.Wirtschaftswissenschaftliche Fakultät, Leibniz Universitat Hannover, 522(0).
Levitin, G.(2005). The Universal Generating Function in Reliability Analysis and Optimization. Berlin: Springer.
                                                            
Journal of Industrial and Systems Engineering
Volume 10, Issue 4
November 2017
Pages 28-42

Files

History

  • Receive Date: 06 March 2017
  • Revise Date: 17 April 2017
  • Accept Date: 22 May 2017

Share

How to cite

Statistics